Accessory Clamp (15mm) M-Series This Toad mount is as

This Toad mount is as low profile as possible to keep the aircraft as low as possible and features all the mount points and hardware you would need for mounting on top or bottom of Alta X

you want CCW ActiveBlade (M4 Fasteners) or CCW ActiveBlade (M12 Motors)

An Alta X** with F9P GPS (not Here2) and you want full RTK capability:

this is the ideal way to control LANC-enabled cameras from the Mōvi Controller for a streamlined setup not possible with standard cables

one counter-clockwise) and fasteners

Accessory Clamp (15mm) M-Series This Toad mount is asUsing four of these 15mm aluminum accessory mount clamps allows users to attach the Cargo Tray to the Cargo Landing Gear via two M3 threaded holes, or to mount any other accessory off of the 15mm landing gear down tubes or cross braces. It can be used anywhere where you can get access to the end of a 15mm tube to install. The clamp can be rotated in any orientation on the 15mm tube and has two M3 threaded holes spaced 8mm apart on center. Features